nti-feuerwehrbekleidung-innenangriff-iconNTi MODEL 1 The original for structural fire fighting

Premium delivery capability

NTi Model 1 - the original

A big step in the evolution of fire protection clothing: The NTi Model 1 has been specially developed to meet the stringent safety requirements of structural fire fighting, while at the same time ensuring high wearing comfort and effortless mobility. The protective suit complies with EN 469 standards and is therefore proven to offer maximum heat and flame resistance. It effectively protects the wearer from hazardous conditions such as flash-over. Despite this high level of protection, the NTi Model 1 is lighter than almost any other firefighter protective clothing. Its breathability, with an RET value of 13.5 PA/W, ensures that the wearer does not overheat even under heavy loads and in extreme ambient temperatures. Additional features such as bacteria and virus protection ensured by the innovative membrane, excellent visibility and an intuitive suspenders adjustment system clearly set the NTi Model 1 apart from conventional fire protection clothing.

nti-feuerwehrbekleidung-modell-1-schwarzblau-rotnti-feuerwehrbekleidung-modell-1-schwarzblau-rot

Darkblue / red

nti-feuerwehrbekleidung-modell-1-schwarzblau-orangenti-feuerwehrbekleidung-modell-1-schwarzblau-orange

Darkblue / orange

nti-feuerwehrbekleidung-modell-1-schwarzblau-goldnti-feuerwehrbekleidung-modell-1-schwarzblau-gold

Darkblue / gold

nti-feuerwehrbekleidung-modell-1-schwarzblaunti-feuerwehrbekleidung-modell-1-schwarzblau

Darkblue

nti-feuerwehrbekleidung-modell-1-rotnti-feuerwehrbekleidung-modell-1-rot

Red

nti-feuerwehrbekleidung-modell-1-orangenti-feuerwehrbekleidung-modell-1-orange

Orange

nti-feuerwehrbekleidung-modell-1-goldnti-feuerwehrbekleidung-modell-1-gold

Gold

nti-feuerwehrbekleidung-innenangriff-iconNTi Model 1 - Product variations

The NTi Model 1 safely withstands fire and heat even in extreme situations, such as those that occur during structural fire fighting. Every one of the numerous variants of this protective suit meets this uncompromising quality standard without exception.

Darkblue

Orange

Red

Gold

Darkblue / gold

Darkblue / red

Darkblue / orange

Outer fabric: Nomex® Outershell Tough (75% meta-aramid (Nomex®)/23% para-aramid (Kevlar®)/2% antistatic fiber)

High-quality, oil-, water- and liquid-repellent membrane from GE ensures full breathability with simultaneous protection against viruses, bacteria, blood and toxic chemicals.

Moisture barrier: General – Electric® ePTFE membrane with GE® Direct Diffusion Technology
Insulation layer / inner lining: Nomex®/Kevlar® quilted with 50% aramid/50% viscose FR

  • EN 469:2020 performance levels X2 Y2 and Z2
  • EN 1149-5 – Electrostatic properties
  • EN ISO 13688 – General requirements for protective clothing
  • ISO 16604 – Virus protection
  • EN ISO 22610 and EN ISO 22612 – Bacterial protection
  • Safety vest exemption

Jacket:

      • Shoulder padding for breathing apparatus
      • Napoleon pocket with bright yellow zipper
      • Two adjustable radio pockets (for digital and analog devices)
      • Lamp holder with safety strap
      • Adjustable arm strap
      • YKK® panic zipper in bright yellow, easily replaceable
      • Inspection opening with access to the membrane and insulation side on both sides
      • Reflective piping for optimum body contour detection
      • Spine label or direct imprint possible
      • Signal Velcro fastener made of bright red Velcro tape – an improperly closed jacket is immediately recognizable
      • Lugs for fixing the antenna and device
      • Two fleece straps for name badges
      • Ergonomic, pre-shaped elbow area reinforced with silicone/carbon/Kevlar
      • Pockets and fasteners with non-slip trims for easy opening, even when wearing gloves
      • Snap hook
      • Suction barrier against moisture penetration
      • Cuffs with thumb loop

Trousers:

    • NTi suspenders adjustment system with comfort quick adjustment
    • Fluorescent yellow tabs for easy opening of the pockets
    • Two bellows pockets (right with knife pocket)
    • Ergonomically pre-shaped knee area, reinforced with silicone/carbon/Kevlar
    • Suction barrier against moisture penetration
    • Inspection opening with access to the membrane and insulation side on both sides
    • Waistband closure with Velcro and zipper
    • Two side pockets with pocket bag
    • Flame resistance knee pads, waterproof and replaceable
    • Reflective piping for optimum body contour detection
    • Step recess with abrasion protection

NTi Model 1 - as reliable as the fire department itself

In an emergency, especially during interior attacks, the combination of the enormous durability of the NTi Model 1 and the freedom of movement provided by its design is an invaluable safety benefit.
Its enormous resistance to heat and flames offers every wearer excellent protection during firefighting operations inside a building.
Every comfort feature also contributes to safety: as the NTi Model 1 is lightweight and super breathable despite its robust design, the risk of fatigue is reduced and the firefighter’s performance, concentration and responsiveness are maintained even during the toughest operations.

Its high visibility thanks to materials that do not require a high-visibility vest makes it easier for team members to communicate and coordinate in environments where visibility is poor due to heavy smoke, for example, or where the visual stimuli caused by fire and flame reflections obscure the visibility of normal clothing colors.
The integrated reflective piping for improved body contour recognition also contributes to this.

The various pockets and lamp holders of the NTi Model 1 ensure that important equipment is always to hand.
The intuitively operated suspenders adjustment system enables quick adjustment and an individual fit.

FAQ - we answer your questions about the NTi Model 1:

Both NTi Model 1 and NTi Model 2 are designed for structural fire fighting. This means that both models must comply with the strict norms and safety standards for indoor use (EN 469 performance levels X1, Y2 and Z2). In contrast, the NTi Allrounder and NTi Multiflex are designed for technical assistance operations and forest and vegetation fire operations and are not suitable for structural fire fighting. NTi Model 2 differs from Model 1 in terms of equipment details such as a more wash-resistant outer fabric, segmented reflective striping, RFID/NFC dual chip and an additional luminescent reflective piping.

Our NTi models are sold exclusively through our specialized dealers for operational and protective clothing.
We will be happy to put you in touch with your nearest dealer using our inquiry form. You can also contact us here if you have any other questions.

For us, premium protective clothing also means premium delivery capability, i.e. we strive to be able to deliver standard sizes from stock as far as possible.
Custom-made products are excluded from this rule, as they have to be specially manufactured after ordering.

NTi from Novotex-Isomat - firefighter clothing with experience

NTi is a brand of Novotex-Isomat from Germany. High-quality protective equipment and uniforms for fire departments have been produced here for decades. Whether for youth firefighters or experienced firefighters, for men or women – we are committed to the safety of every firefighter, uncompromising material and workmanship quality, contemporary environmental standards and the best customer service in the development and production of every single item. With us, you will always find a personal contact for all your concerns and questions. Feel free to contact us directly and talk to us about what we can do for you!